Numerical and experimental studies of a capillary-tube embedded PCM component for improving indoor thermal environment

Jobli, M. I., Yao, R. ORCID: https://orcid.org/0000-0003-4269-7224, Luo, Z. ORCID: https://orcid.org/0000-0002-2082-3958, Shahrestani, M. ORCID: https://orcid.org/0000-0002-8741-0912, Li, N. and Liu, H. (2019) Numerical and experimental studies of a capillary-tube embedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148. pp. 466-477. ISSN 1359-4311 doi: 10.1016/j.applthermaleng.2018.10.041

Abstract/Summary

This paper aims to analyse the thermal characteristics of a novel system of Capillary Tubes embedded in a Phase Change Material (CT-PCM) as part of active building environmental design for energy conservation and the improvement of indoor thermal environment. The CT-PCM system is proposed based on the concept that low-grade energy utilisation potential could be harnessed and maximised by buildings’ radiant heating/cooling systems and phase change material. The CT-PCM component is first built in the laboratory, and the thermal characteristics of the CT-PCM are investigated through a set of thermal response experiments. In addition, a simplified model is developed to assess the long-term thermal performance of the CT-PCM system for its application during a strategical system design stage. To ensure the robustness of the numerical model in the assessment of the thermal performance of the system, the developed model is evaluated against the experiments under a set of dynamic thermal boundary conditions. The evaluation process revealed that when the flow rate of thermal fluids in the CT-PCM system is more than 800 ml/min, the simulation results of the proposed simplified model is in a good agreement with the experiment. When the flow rate in the capillary tube is smaller than 800 ml/min, the correction factors are derived to address the non-uniformity of temperature distribution.

Item Type	Article
URI	https://reading-clone.eprints-hosting.org/id/eprint/81252
Identification Number/DOI	10.1016/j.applthermaleng.2018.10.041
Refereed	Yes
Divisions	Science > School of the Built Environment Science > School of the Built Environment > Urban Living group Science > School of the Built Environment > Energy and Environmental Engineering group
Publisher	Elsevier
Download/View statistics	View download statistics for this item