Isolated corona current monitoring using a compensated light-emitting diode as an unpowered sensor

Harrison, R. G. ORCID: https://orcid.org/0000-0003-0693-347X, Escobar Ruiz, V. ORCID: https://orcid.org/0000-0003-1336-0921, Nicoll, K. ORCID: https://orcid.org/0000-0001-5580-6325 and Ambaum, M. H. P. ORCID: https://orcid.org/0000-0002-6824-8083 (2023) Isolated corona current monitoring using a compensated light-emitting diode as an unpowered sensor. Review of Scientific Instruments, 94 (9). 094504. ISSN 1089-7623 doi: 10.1063/5.0170176

Abstract/Summary

Measurement of emission current at high voltage is necessary in monitoring ion production from a corona source, to provide independent confirmation of operation. The wide common mode range required is usually obtained through an isolated system, which requires isolated power to operate, adding complexity and volume. Passing the current through a LED provides an alternative measurement method, as the LED’s brightness can be used to signal the current’s magnitude. The forward voltage loss across the LED is negligible compared with the emitter voltage. Selection of a discrete LED for this task rather than using one within a standard integrated optocoupler package improves the low current sensitivity by two orders of magnitude. A high efficiency discrete infra-red LED-photodiode pair is demonstrated to provide measurements of corona currents between 0.2uA and 20uA, using a second LED-photodiode pair for analogue linearity compensation. The inherent simplicity is well suited to new applications of ion emission in propulsion and weather modification.

Item Type	Article
URI	https://reading-clone.eprints-hosting.org/id/eprint/113201
Identification Number/DOI	10.1063/5.0170176
Refereed	Yes
Divisions	Science > School of Mathematical, Physical and Computational Sciences > Department of Meteorology
Publisher	AIP
Download/View statistics	View download statistics for this item