Conducting nanofibres produced by electrospinning

Sen, S., Davis, F. J. ORCID: https://orcid.org/0000-0003-0462-872X, Mitchell, G. R. and Robinson, E. (2009) Conducting nanofibres produced by electrospinning. Journal of Physics: Conference Series, 183 (1). 012020. ISSN 1742-6588 doi: 10.1088/1742-6596/183/1/012020

Abstract/Summary

Electrospun fibres based on polypyrrole have been prepared. The incorporation of preformed polypyrrole into fibres electrospun from a carrier polymer can only be achieved when materials are prepared with particulates smaller than the cross-section of the fibre; even so there are some problems, with the substantial loss of material from the electrode tip. As an alternative approach, soluble polypyrroles can be prepared but these are not of sufficient viscosity to prepare electrospun fibres, once again a carrier polymer must be employed. More effective loadings are gained by the process of coating the outer surface of a pre-spun fibre; in this way electrospun fibres coated with polypyrrole can be prepared. This approach has been adapted to produce silver coated polymer fibres by the use of copolymers of styrene and 3-vinyl benzaldehyde.